About the dryer control panel, Power, Dry cycles – GE 234D1050P001 User Manual
Page 7: Sensor cycles description, Timed dry cycles description, My cycle description, Timed dry
7
About the dryer control panel .
Power
Press to “wake up” the display . If the display is active, press to put the dryer in the standby mode .
NOTE: Pressing POWER does not disconnect the appliance from the power supply.
Dry Cycles
The dry cycle controls the length and tumble speed of the drying process . The chart below will help you match the dry
setting with the loads .
Sensor Cycles
Description
COTTONS
For cottons and most linens .
NORMAL/MIXED LOADS
For loads consisting of cottons and poly-blends .
EASY CARE
For wrinkle-free and permanent press items .
ACTIVE WEAR
Clothing worn for active sports exercise and some casual wear . Fabrics include new
technology finishes and stretch fibers such as Spandex .
DELICATES
For lingerie and special-care fabrics .
SPEED DRY
For small loads that are needed in a hurry, such as sports or school uniforms . Can also be
used if the previous cycle left some items damp, such as collars or waistbands .
1
2
Timed Dry Cycles
Description
WARM UP
Provides 10 minutes of warming time to warm up clothes .
AIR FLUFF
Use this feature to tumble items without heat .
DEWRINKLE
(on some models)
For removing wrinkles from items that are dry or slightly damp . This cycle is not
recommended for delicate fabrics .
STEAM REFRESH
(on some models)
For slightly wrinkled dry garments . Significantly reduces wrinkles on up to 5 garments . After
the STEAM REFRESH Cycle, the unit will beep and display “0:00 .” If the unit is not turned off
or if the door is not opened, the dryer will continue to tumble for 30 minutes . At the end of 30
minutes, it will display “0:00” and the cycle will be complete .
Note:
A single extremely light fabric item may need to have an additional item included in the
STEAM REFRESH
cycle to achieve optimum results .
STEAM DEWRINKLE
(on some models)
For use with larger loads than STEAM REFRESH . Ideal for loads left in dryer for an extended
time .
My Cycle
Description
MY CYCLE
Press to use, create or modify custom dry cycles . (See page 8 for more details)
Timed Dry
Use to set your own dry time . TIMED DRY is also recommended for small loads
To use TIMED DRY:
1.
Turn dry cycle dial to TIMED DRY .
2.
Increase the drying time by pressing the TIMEDRY ADJUST
+
button .
Note:
This button only increases the time . When max time is reached, pressing the button again will reset the counter to
the lowest setting .
3.
Select the TEMP.
4.
Close the door .
5.
Press Start
3
GEAppliances.com