GE 26976 - Manual (Page 21)

21
NOTE:
• As you scroll through the ringer settings, the phone emits the
corresponding ringer tone level accordingly.
• If you turn the ringer off, the display shows RINGER = OFF when
the phone is in standby mode.
3. Press the ringer HI/LO/OFF button to store. If a change is made, you
will hear a confirmation tone, and SET RINGER shows in the display.
4. Use the CID VOL(+) / CID VOL(-) arrow keys to select 1, 2, 3 . Ringer
tone 2 is the default.
NOTE: As you scroll through the ringer tone settings, the phone
emits the corresponding ringer tone accordingly.
5. Press the ringer HI/LO/OFF button again to store. (if a change is made,
you will hear a confirmation tone).
S
YSTEM
S
ETUP
There are four programmable menus available: Language, Area Code,
Tone/Pulse Dialing and Default Setting.
NOTE:
• To program these settings, the handset should be OFF (not in
TALK mode).
• Press the TONE*/exit button to return to standby mode.
L
ANGUAGE
Set the display language to show messages in either English, French
or Spanish.
1. Press flash/program button until SET LANGUAGE ENG FRA ESP
shows in the display.
2. Use the CID VOL(+) / CID VOL(-) arrow keys to select ENG (English), FRA
(French) or ESP (Spanish). English is the default.
SET RINGER TONE
>1 2 3