GE 26976 User Manual

Page 44

Advertising
background image

44

Handset or Spacemaker® unit may be out of range from the wall base

unit. Move closer to wall base unit.

Make sure the handset battery is properly charged (16 hours).

Make sure the handset battery pack is correctly installed.

Did the handset beep when you pressed the TALK/CALLBACK button?

Did the display indicator turn on? The battery may need to be charged.

Dial tone is OK, but can't dial out

• Make sure the tone/pulse setting is programmed correctly.

Handset does not ring

Make sure the ringer switch on the handset is turned to ON.

You may have too many extension phones on your line. Try

unplugging some phones.

See solutions for “No dial tone.”

Handset or Spacemaker® unit loses registration ID

If the handset or Spacemaker® unit becomes unregistered,

PRESS

AND HOLD BASE PAGE KEY

shows in the display to prompt you to re-

register the handset or the Spacemaker® until the wall base unit
restores the registration ID.

If registration is not successful, unplug the wall base unit from the

electrical outlet and re-plug it after a few seconds to reset the unit.

You experience static, noise, or fading in and out

Change channels

Handset or Spacemaker® unit may be out of range of wall base unit.

Move closer to wall base unit.

Relocate the wall base unit.

Charge the battery.

Make sure wall base unit is not plugged into an outlet with another

household appliance.

Advertising