GE twin set 21880 - Manual (Page 17)

– 16 –
GREEK; RUSSIAN; BULGARIAN; HUNGARIAN
Making Internal Calls
IMPORTANT : Internal calls can be made only if more than one
handset is registered on the base station.
Press [INT/ OK] key during standby mode.
Press a digit to specify which handset (1~4) to call to.
The other handset will ring with the ‘INT’ icon flashing.
When other handset answered, the internal call is established.
Press
key to end the call.
Note: If an external call is received during an internal call, short
acoustic signals are issued (call waiting).
Making External Calls
Direct dialling
Press key and wait for a dialing tone.
Dial the telephone number.
Press
key to end the call.
On hook dialing
Dial the telephone number (delete incorrect entries by pressing
“C” key).
Press key to carry out the conversation.
Press key to end the call.
VMWI/LED
The VMWI/LED in the handset will flash when there are new voice
message calls received. Icon
turns on and the LCD display
“Message” in the call log memory.
This service need subscription to local operator and it supports the
FSK CLI system only.