GE twin set 21880 - Manual (Page 18)

– 17 –
Taking Calls
When an external call is received, all registered handsets and the base
station ring. EXT flashes in the handset display and, if subscribed, the
telephone number of the caller appears (network depended). If the
caller has been stored in your phone book, the name appears. The
incoming call VMWI/LED on the base station flashes. In the case of
an internal call or on pressing the paging key on the base station, INT
flashes in the handset display.
Handset is in the charge unit
Take the handset from the base station; a connection is
automatically established (when the AUTO ANS function is
active). Otherwise, press
key.
Press key to end the call.
Handset is not in the base station
Press key to make a call.
Press key to end the call.
Redialling
The phone stores the last five numbers dialled in the redial
memory
In standby mode, press key; the last call number dialed is
displayed. Press or key to search the required number
in the redial memory list.
Press key to carry out the conversation.
Press key to end the call.
Note: 1. If the number is longer than 12 digits, only the last 12 digits
will be shown.
2. Name is displayed instead if number is matched with phone
Dialling from the Phone Book
Press key; the first entry in the phone book appears. (or
“EMPTY” if no entry)