GE twin set 21880 - Manual (Page 30)

– 29 –
Redial Memory Access
Press REDIAL key to access the redial memory.
Note: If there is no record in the memory, [EMPTY] will display.
Press ◄CID or REDIAL► key to view latest/earlier record.
Or press EXIT key to exit.
Or press CLEAR key to delete the record.
Or press and hold CLEAR key 2 seconds to delete all records. .
“ERASE ALL” is shown. Press CLEAR or SELECT key again
to confirm
Or press key or pick up the corded handset to dial the
number.
Direct Memory Access (M1)
Storage
In standby mode, key in the digits (0 to 9 or Pause) or
reviewing the Redial memory/ Indirect memory/ CID memory
Press MEM and then press M1.
Note: MI memory cannot store Name but Number only.
View, Clear and Dial
Press M1 key to access M1 memory
Refer the operation procedures of Redial Memoryy Access.
Indirect Memory Access (Memory 1 to 10)
Storage
Press MENU key, press ◄ or ► until PHONE BOOK appears.
Then press [SELECT] key.
press ◄ or ► to choose NEW ENTRY. Press SELECT key..
User is prompted to enter Number. Press SELECT to confirm.
User is prompted to enter Name. Press SELECT 2 times to
complete..
Or
In standby mode, key in the digits (0 to 9 or Pause)