GE twin set 21880 - Manual (Page 34)

– 33 –
Teleconference (Cored base station to
Handset)
After have received an external call, it is possible to include a
cordless handset in the conversation (three way conference).
press “PAGE” key and press [1 or 2 or 3 or 4], the handset
number you want to call. The called cordless handset rings and
“INT” icon is displayed and blink.
Press key on handset, a 3 way conference is established.
When you hang up the corded base station, external line is then
transferred to the cordless handset.
Teleconference (Cordless Handset to Corded
base station)
After have received an external call, it is possible to include a corded
base station in the conversation (three way conference).
press “INT” key and press digit [0]. The corded base station
rings.
Press base station key or pick up the corded handset, a 3
way conference is established.
When you press key on the cordless handset, external line is
then transferred to the corded base station.
Note:
1. There is no intercom between cordless handset and corded base
station.
2. If cordless handset does not answer, press “PAGE” key again can
stop paging.
3
. With base station in standby mode, if “PAGE” key is pressed over 4
seconds, base station will enter the Registration mode. “PAGE” key
does not function, “REGISTER” is displayed and In-use LED blinks.
Registration mode EXIT only after 5 minutes or
Reset AC power of
base station.