Gefen 8x8 EXT-DVI-848 - Manual (Page 16)

13
The RMT-8-IR remote control can be used to select the source that will be displayed
on the monitor connected to the EXT-RMT-MATRIX-848.
RMT-8-IR Button DVI Source
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
LED Indicator
Input Selection
Buttons
(REMOTE SOLD SEPARATELY)
(PRODUCT SOLD SEPARATELY) (PRODUCT SOLD SEPARATELY)
Once the EXT-RMT-MATRIX-848 Remote is installed and connected to a remote
output port on the 8x8 DVI Matrix, use the direct selection buttons to chose a source
to view. Once a source is chosen, its corresponding LED should become active.
Optionally, switching can be done using the RMT-8-IR remote control included with
the optional EXT-RMT-MATRIX-848 or through the RS-232 serial communications
port on the rear panel.
EXT-RMT-MATRIX-848 REMOTE OPERATION