Gefen 8x8 EXT-DVI-848 - Manual (Page 17)

14
RMT-8-IR IR CHANNEL CONFIGURATION
The RMT-8-IR remote control (included with purchase of the EXT-RMT-MATRIX-848)
has 4 discrete IR channels for use if the default IR code set confl icts with other
remote control commands in your setup. There are 2 DIP Switches underneath the
battery compartment cover on the RMT-8-IR remote control that must match DIP
Switches on the EXT-RMT-MATRIX-848. There are 4 DIP Switches located on the
underside of the EXT-RMT-MATRIX-848. DIP Switches 1 and 2 on the EXT-RMT-
MATRIX-848 correspond to DIP Switches 1 and 2 on the RMT-8-IR remote control.
See below for DIP Switch confi guration of each of the available remote channels.
Remote Channel 1:
Default
1 2
Remote Channel 2:
1 2
Remote Channel 3:
1 2
Remote Channel 4:
1 2
RMT-8-IR REMOTE CONTROL
EXT-RMT-MATRIX-848
Remote Channel 1:
Default
Remote Channel 4:
1
1
2
2
3
3
4
4
Remote Channel 3:
1 2 3 4
Remote Channel 2:
1 2 3 4
RMT-8-IR DIP Switches