Gefen 8x8 EXT-DVI-848 - Manual (Page 25)

22
APPENDIX B
Unmask Masked Outputs
This function unmasks outputs that were masked by “#MASK”
#UNMASK_param1[_param2][_param3][_param4][_param5]
[_param6][_param7][_param8]\r
Parameter Name Value
1 (2-8 optionally) MONITOR [A : H]
RMT-848IR Address
This function set the remote channel that must match the GEFEN RMT-848IR
remote control.
#RMT_param1\r
Parameter Value
1 [0:3]
DS EDID Store In Locals Edid
This function reads EDID fi le from DS and store it in any input Locals EDID.
#EDIDDSTOLO_param1_param2[_param3][_param4][_param5] [_param6]
[_param7][_param8][_param9]\r
Parameter Name Value
1 MONITOR [A:H]
2 (3-9 optionally) INPUT [1:8]
DS EDID Store In EDID Bank
This function reads EDID fi le from DS and store it in EDID bank.
#EDIDDSTOBA_param1_param2\r
Parameter Name Value
1 MONITOR [A:H]
2 EDID bank offset [1:7]