Gefen 8x8 EXT-DVI-848 - Manual (Page 28)

25
APPENDIX B
Set Output Pre Emphasis
This function will set output Pre Emphasis in db.
#PE_param1_param2\r
Parameter Name Value
1 MONITOR [A:H]
2 Pre Emp. level [db] [0,2,4,6]
Set Default Setting
This function will set the product back to its default setting.
1. Routing state will be INPUT1-MONA, INPUT2-MONB, …,
2. All the features with default to how the hardware switches are set.
The DVI and HDMI 8x8 has the following shortcut routing commands. If the user
has not changed these commands, the routing will be as follows:
‘s0’ - Route 1-A, 2-B, 3-C ...
‘sx’ - All outputs to input x