GE 0005467 - Manual (Page 18)

18
Handset Ringer ON/OFF
NOTE: This setting may only be made with the handset.
1. Press the menu/flash button until RINGER 4 1ON or 2OFF shows in the display.
1ON is the default setting.
. Use the CALLER ID-VOLUME (6 or 5) button or the touch-tone pad on the
handset to scroll to 1ON or 2OFF.
3. Press mute/menu to save. You will hear a confirmation tone.
NOTE: If you turn the ringer OFF, RINGER OFF shows in the display.
Ringer Tone
NOTE: This setting may be made with the base and the handset.
You may choose from three different ringer tones.
1. Press the
menu/flash button on base or mute/menu button on handset until SET
RINGER TONE or RINGER TONE shows on the display. The default ringer tone is 1.
. Use the touch-tone pad to select 1, , 3 on base or 0~9 on handset or use the
caller id (9 or :) button on the base unit or CALLER ID-VOLUME (6 or 5) button
on the handset to scroll to your selection. The ringer tone plays for few seconds.
3. Press the menu/flash button on base or mute/menu button on handset again to
store your selection. You will hear a confirmation tone.
VIP Ring Tone
Note: This setting may only be made with the handset.
This feature allows you to assign a specific ring tone to a number stored in Memory. It
is recommended that you store a Caller ID record into Memory for this purpose.
1. Press the
mute/menu button until VIP RING TONE shows in the display.
. Press the desired memory location (0 through 9). If there is a number stored in the
selected memory location, VIP RT4DEFAULT shows in the display.
3. Press CALLER ID-VOLUME (6 or 5) on the handset to select from 1 to 10 or
DEFAULT to use ring tone set in the Ring Tone Menu or SILENT to silence ringer.
4. Press mute/menu to save. You will hear a confirmation tone.
NOTE: If the number stored in Memory is deleted, the same record
inside the VIP Ring Tone will be also deleted.