GE 0005467 - Manual (Page 31)

31
1. Make sure the phone is OFF (not in TALK mode).
. Press the memory button.
3. Press the desired memory location button (0-9), or use the caller id (9 or :) button
to scroll to the desired telephone number.
4. Press the speaker/call back button. The number dials automatically.
Chain Dialing from Memory
Use this feature to make calls that require a sequence of numbers, such as a
frequently used long distance card number. The following example shows how you
can store each part of the long dialing sequence and use chain dialing to make a call
through a long distance service provider:
The Number For
Memory Location
Long Distance Access Number 7
Authorization Code 8
Frequently called long distance number 9
Handset:
Make sure the phone is
ON.
1. Press mem/conference and then press 7.
. When you hear the access tone, press mem/conference and then press 8.
3. At the next access tone, press mem/conference and then press 9.
Base:
Press the
speaker/call back button, or lift the corded handset.
1. Press memory and then press 7.
. When you hear the access tone, press memory and then press 8.
3. At the next access tone, press memory and then 9.
TIP: Wait for the access tones before pressing the memory button
or your call might not go through.