GE 0005467 - Manual (Page 29)

9
4. Use the base or cordless handset touch-tone pad to enter a name (up to 15
characters). More than one letter is stored in each of the number keys. For example,
to enter Bill Smith, press the  key twice for the letter B. Press the 4 key 3 times for
the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the
second letter L, and press the 1 key to insert a space between the first and last
name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M;
press the 4 key 3 times for the letter I; press the 8 key for the letter T; press the 4
key twice for the letter H.
5. Press the memory button or mem/conference button again to save your selection.
The display shows ENTER TEL NUMBER.
NOTE: If you make a mistake, press the delete button on the
base or delete on the handset to backspace and erase the wrong
character(s) or number(s).
6. Use the touch-tone pad to enter the area code followed by the telephone number
(up to 4 digits, including pauses) and press the memory button or mem/conference
button again to save your selection. You will hear a confirmation tone.
7. To enter another name and number in a different memory location, return to Step 1
and repeat the process.
Storing a Redial Number
1. Make sure the phone is OFF (not in TALK mode).
. Repeat Step 1 through 6 in Storing a Name and Number in Memory.
3. Press
redial to display the redial number and name.
4. Press the memory button on the base or the mem/conference button on the
handset to confirm.
NOTE : If the number you want to redial has more than 24 digits,
the telephone number cannot be stored in memory.
Inserting a Pause in the Dialing Sequence
Press the #PAUSE/ringer button on the touch-tone pad to insert a delay in the dialing
sequence of a stored telephone number when a pause is needed to wait for a dial tone
(for example, after you dial 9 for an outside line, or wait for a computer access tone.)
Each pause counts as 1 digit in the dialing sequence.