Grizzly G0702 - Manual (Page 16)

-14-
Model g0702 (Mfg. since 1/12)
SECtION 4: OpERAtIONS
Damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. Always wear safety glasses and
a respirator when operating this machine.
NOTICE
If you have never used this type of machine
or equipment before, WE StRONGLy REC-
OMMEND that you read books, review
industry trade magazines, or get formal
training before beginning any projects.
Regardless of the content in this section,
Grizzly Industrial will not be held liable for
accidents caused by lack of training.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
to reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
Operation Overview
this overview gives you the basic process that
happens during an operation with this machine.
Familiarize yourself with this process to better
understand the
Operations section.
to complete a sanding operation, the operator
does the following:
1. Examines the workpiece to make sure it is
suitable for sanding.
2. adjusts the table tilt, if necessary, to the
required sanding angle, and locks the table
in place.
3. inserts the miter bar in either the X-axis or
y-axis miter slots.
4. adjusts the miter angle for the required hori-
zontal sanding angle, and locks it in place.
5. uses the appropriate clamping device or jig
for small workpieces.
6. Wears safety glasses and a respirator, and
locates push sticks if needed.
7. Starts the machine and dust collector.
8. holds the workpiece firmly and flatly against
both the table and miter, then pushes the
workpiece into or along the sanding disc.
9. Moves the workpiece to different locations
on the sanding disc to wear the sandpaper
evenly and to prevent the sandpaper from
overheating.
10. Stops the machine.