Grizzly G0702 - Manual (Page 4)

-2-
Model g0702 (Mfg. since 1/12)
INtRODuCtION
the Model g0702 disc Sander features a 1 hp,
120v, 1720 rpM motor equipped with a motor
brake and a 12" diameter sanding disc. the preci-
sion ground cast iron table is cut with two miter
slots that allow for an included miter gauge to
move a workpiece in either an X or y direction
against the sanding disc. an adjustable miter
gauge provides a means for angle sanding. a built
in 2
1 ⁄
2
" od dust port allows for dust collection. a
selection of adhesive sanding discs are available
through the grizzly catalog.
Machine Description
We stand behind our machines. If you have
any questions or need help, use the information
below to contact us. Before contacting, please get
the serial number and manufacture date of your
machine. This will help us help you faster.
Grizzly Technical Support
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Email: [email protected]
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: [email protected]
Contact Info
We are proud to offer this manual with your new
machine! We've made every effort to be exact
with the instructions, specifications, drawings,
and photographs of the machine we used when
writing this manual. However, sometimes we still
make an occasional mistake.
Also, owing to our policy of continuous improve-
ment,
your machine may not exactly match the
manual. If you find this to be the case, and the dif-
ference between the manual and machine leaves
you in doubt, check our website for the latest
manual update or call technical support for help.
Before calling, find the manufacture date of your
machine by looking at the date stamped into the
machine ID label (see below). This will help us
determine if the manual version you received
matches the manufacture date of your machine.
For your convenience, we post all available man-
uals and manual updates for free on our website
at
www.grizzly.com. Any updates to your model
of machine will be reflected in these documents
as soon as they are complete.
Manufacture Date
of Your Machine
Manual Accuracy