Graco 7588 - Manual (Page 35)

11
2.3 Removing and Attaching Base
2.4 Adjusting Handle
To remove infant restraint, squeeze handle at
back of seat and lift infant restraint from base
as shown ‹ .
To put infant restraint in base, push infant
restraint down until it clicks into base. Pull
up on infant restraint to be sure it is
latched firmly into base.
‹
1. Press handle adjustment buttons on
both sides of handle Π.
2. Rotate handle until it clicks into any
of three positions (for carrying,
reclining, or sitting). BOTH handle
adjustment buttons must pop out
to lock handle in place  .
3. Push and pull on the handle to be
sure it is locked firmly in position.
Œ

Carrying
Reclining
Sitting