Genie GS-2668 DC - Manual (Page 19)

Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 17
Operator's Manual Third Edition • Third Printing
FUNCTION TESTS
At the Platform Controls
Test Emergency Stop
17 Push in the platform red Emergency Stop button
to the off position.
Result: No functions should operate.
18 Pull the red Emergency Stop button out to the
on position.
Result: The green power light should come on.
Test the Horn
19 Push the horn button.
Result: The horn should sound.
Test the Function Enable Switch
20 Do not hold the function enable switch on the
control handle.
21 Slowly move the control handle in the direction
indicated by the blue arrow, then in the direction
indicated by the yellow arrow.
Result: No functions should operate.
Test the Up/Down Functions
22 Press the lift function select button.
23 Press and hold the function enable switch on the
control handle.
24 Slowly move the control handle in the direction
indicated by the blue arrow.
Result: The platform should raise.
25 Release the control handle.
Result: The platform should stop raising.
26 Press and hold the function enable switch.
Slowly move the control handle in the direction
indicated by the yellow arrow.
Result: The platform should lower. The descent
alarm should sound while the platform is
lowering.