Genie GS-2668 DC - Manual (Page 35)

Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 33
Operator's Manual Third Edition • Third Printing
SPECIFICATIONS
Model GS-3268 DC
Height, working maximum 38 ft 11.8 m
Height, platform maximum 32 ft 9.8 m
Height, stowed maximum 97 in 2.46 m
Rails up
Height, stowed maximum 69 1 / 2 in 1.77 m
Rails lowered
Height, stowed maximum 51 1 / 2 in 1.31 m
Rails off
Height, guard rails 40 in 1.02 m
Width 68 in 1.73 m
Length, platform retracted 105 in 2.67 m
Length, platform extended 165 in 4.19 m
Maximum load capacity 1000 lbs 454 kg
Wheelbase 73 in 1.85 m
Turning radius (outside) 145 in 3.68 m
Turning radius (inside) 60 in 1.52 m
Ground clearance 7 1 / 2 in 19 cm
Weight See Serial Plate
(Machine weights vary with option configurations)
Gradeability 25%
Airborne noise emissions 80 dB
Maximum sound level at normal operating workstations
(A-weighted)
Power source 8 Batteries, 225AH
Controls Proportional
AC outlet in platform standard
Maximum hydraulic pressure 3500 psi 241 bar
(functions)
System voltage 48V
Tires size 23 x 10.5 x 360
Platform dimensions
Platform length x width 99 in x 61 in
2.5 x 1.5 m
Platform extension length 60 in 1.5 m
Drive speeds
Stowed, maximum 3.3 mph 5.3 km/h
Platform raised, maximum 0.5 mph 0.8 km/h
40 ft/54.6 sec 12.2 m/54.6 sec
Floor Loading Information
GVW + Rated Load 8580 lbs 3892 kg
Axle load, maximum 3940 lbs 1787 kg
Wheel load, maximum 1970 lbs 893 kg
Localized pressure per tire 82 psi 5.78 kg/cm 2
566 kPa
Occupied pressure 173 psf 8.29 kPa
Note: Floor loading information is approximate and
does not incorporate different option configurations.
It should be used only with adequate safety factors.
Continuous improvement of our products is a Genie policy.
Product specifications are subject to change without notice or obligation.