Operation from ground with controller, Fall protection, After each use – Genie GS-2668 DC User Manual

Page 25

Advertising
background image

Part No. 82750

Genie GS-2668 DC and Genie GS-3268 DC

23

Operator's Manual

Third Edition • Third Printing

OPERATING INSTRUCTIONS

Drive Select Switch

Machine on incline symbol:
Low range operation for inclines

Error Indicator Light On

If the error indicator light is on, push
in and pull out the red Emergency
Stop button to reset the system.

If the light stays red, tag and
remove the machine from service.

To Extend and Retract Platform
(Manual Platform Extension)

1 Lift the platform extension lock handle to the

horizontal position.

2 Push the platform extension lock handle to

extend the platform to the desired position.

Do not stand on the platform extension while trying
to extend it.

3 Lower the platform extension lock handle.

Operation From Ground with
Controller

Maintain safe distances between the operator, the
machine and fixed objects.

Be aware of the direction the machine will travel
when using the controller.

Fall Protection

Personal fall protection equipment (PFPE) is not
required when operating this machine. If PFPE is
required by job site or employer rules, the following
shall apply:

All PFPE must comply with applicable
governmental regulations and must be inspected
and used in accordance with the manufacturer’s
instructions.

After Each Use

1 Select a safe parking location—firm level

surface, clear of obstructions and traffic.

2 Lower the platform.

3 Turn the key switch to the off position and

remove the key to secure from unauthorized
use.

4 Chock the wheels.

5 Charge the batteries.

Advertising
This manual is related to the following products: