GE 164D4290P024 User Manual

Page 11

Advertising
background image

11

Safety Instructions

Operating Instructions

Safety Instructions

Operating Instructions

Care and Cleaning

Troubleshooting T

ips

Consumer Support

www.GEAppliances.com

Tones at the End of a Timed Cycle

At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the CLEAR/OFF pad is pressed. This continual
6 second beep may be canceled.

To cancel the 6 second beep:

Press the BAKE and BROIL HI/LO pads

at the same time for 3 seconds until

the display shows SF.

Press the KITCHEN TIMER ON/OFF

pad. The display shows CON BEEP

(continual beep). Press the KITCHEN
TIMER ON/OFF

pad again. The display

shows BEEP. (This cancels the one

beep every 6 seconds.)
Press the START pad.

12 Hour, 24 Hour or Clock Black-Out

Your control is set to use a 12 hour clock.

If you would prefer to have a 24 hour

military time clock or black-out the clock

display, follow the steps below.

Press the BAKE and BROIL HI/LO pads

at the same time for 3 seconds until

the display shows SF.
Press the CLOCK pad once. The

display will show 12 hr. If this is

the choice you want, press the
START

pad.

Press the CLOCK pad again to change to

the 24 hour military time clock. The

display will show 24 hr. If this is the choice

you want, press the START pad.
Press the CLOCK pad again to black-out

the clock display. The display will show
OFF.

If this is the choice you want, press

the START pad.
NOTE: If the clock is in the black-out mode you
will not be able to use the Delay Start function.

Cook and Hold

Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
the cooking function is finished.

To activate this feature, follow the steps

below.

Press the BAKE and BROIL HI/LO pads

at the same time for 3 seconds until

the display shows SF.

Press the COOKING TIME pad.

The display will show Hld OFF.
Press the COOKING TIME pad again

to activate the feature. The display

will show Hld ON.
Press the START pad to activate

the cook and hold feature and

leave the control set in this special

features mode.

Advertising
This manual is related to the following products: