Clock and timer, Using the clock and timer – GE 164D4290P024 User Manual

Page 14

Advertising
background image

14

Consumer Support

Troubleshooting T

ips

Care and Cleaning

Operating Instructions

Safety Instructions

Using the clock and timer.

To Set the Clock

The clock must be set to the correct time

of day for the automatic oven timing

functions to work properly. The time of

day cannot be changed during a timed

baking or self-cleaning cycle.

Press the CLOCK pad.
Press the number pads.
Press the START pad.

Make sure the clock is set to the
correct time of day.

To Set the Timer

Press the KITCHEN TIMER ON/OFF

pad.
Press the number pads until the

amount of time you want shows in

the display. For example, to set 2

hours and 45 minutes, press 2, 4

and 5 in that order.
If you make a mistake press the
KITCHEN TIMER ON/OFF

pad and

begin again.

Press the START pad.
When the timer reaches :00, the

control will beep 3 times followed

by one beep every 6 seconds until

the KITCHEN TIMER ON/OFF pad

is pressed.

The 6 second tone can be canceled by following
the steps in the Special features of your oven
control section under Tones at the End of a
Timed Cycle.

The timer is a minute timer only.

The timer does not control oven
operations. The maximum setting on
the timer is 9 hours and 59 minutes.

To Reset the Timer

If the display is still showing the time

remaining, you may change it by pressing

the KITCHEN TIMER ON/OFF pad, then

press the number pads until the time you

want appears in the display.

If the remaining time is not in the display

(clock, delay start or cooking time are in

the display), recall the remaining time by

pressing the KITCHEN TIMER ON/OFF pad

and then pressing the number pads to

enter the new time you want.

To Cancel the Timer

Press the KITCHEN TIMER ON/OFF pad

twice.

Advertising
This manual is related to the following products: