GE ZET2 - Manual (Page 4)

4
Place the oven on a table or platform
even with the cutout opening.
(Platform must support 175 lbs.
[79 kg] single, 350 lbs. [159 kg]
double.)
Installation Instructions
Pre-Installation Checklist
cont.
Remove the bottom trim from the top
of the oven. It will be installed at the
end of the installation process. The
trim is wrapped separately and taped
to the top of the unit.
To Remove the Door
(if necessary)
Door removal is not a requirement for
installation of the product, but is an
added convenience. To remove the door:
Open the oven door as far as it will go.
Push both hinge
locks down toward
the door frame,
to the unlocked
position. This may
require a flat blade
screwdriver.
NOTE: The oven door is very heavy. Be sure
you have a firm grip before lifting the oven
door off the hinges. Use caution once the
door is removed. Do not lay the door on its
handle. This could cause dents or scratches.
Hinge
Unlocked
Position
Hinge
Slot
Hinge
Arm
DO NOT LIFT THE DOOR
BY THE HANDLE!
Place hands on both sides of
the door, and close the oven
door to the removal position,
which is most of the way.
Lift door up
and out until
the hinge arms
clear the slots.
Hinge
Unlocked
Position
Hinge
Slot
Hinge
Arm
Hinge Clears Slot
Removal Position