Genie Z-34 - Manual (Page 19)

Part No. 56011 Genie Z-34/22 Bi-Energy 17
Operator's Manual First Edition • Fifth Printing
FUNCTION TESTS
Test the Drive Enable System
40 Press down the foot switch and retract the
primary boom to the stowed position.
41 Rotate the turntable until the boom moves past
one of the non-steer wheels.
Result: The drive enable
indicator light should come
on and remain on while the
boom is anywhere in the
range shown.
42 Move the drive control handle off center.
Result: The drive function should not operate.
43 Move and hold the drive enable toggle switch up
or down and slowly move the drive control
handle off center.
Result: The drive function should operate.
Note: When the drive enable system is in use, the
machine may drive in the opposite direction that the
drive and steer control handle is moved.
Use the color-coded
direction arrows on the
platform controls and the
drive chassis to identify the
direction of travel.
Test Auxiliary Controls
44 Press down the foot switch.
45 Simultaneously hold the auxiliary power switch
on and activate each function control handle or
toggle switch.
Note: To conserve battery power, test each
function through a partial cycle.
Result: All boom and steer functions should
operate. The drive function should not operate
with auxiliary power.
Test the Lift/Drive Select Function
(if equipped)
46 Press down the foot switch.
47 Move the drive control handle off center and
activate a boom function toggle switch.
Result: No boom functions should operate. The
machine will move in the direction indicated on
the control panel.
Blue
Yellow