Engine idle select (rpm), Auxiliary controls – Genie Z-34 User Manual

Page 23

Advertising
background image

Part No. 56011

Genie Z-34/22 Bi-Energy

21

Operator's Manual

First Edition • Fifth Printing

Drive Enable

Light on indicates that the boom has moved just
past either non-steer wheel and drive function has
been interrupted.

To drive, hold the drive enable switch to either
side and slowly move the drive control handle off
center.

Be aware that the machine may move in the
opposite direction that the drive and steer controls
are moved.

Always use the color-coded direction arrows on
the platform controls and the drive chassis to
identify the direction the machine will travel.

Low Battery Indicator Light

Flashing light indicates battery power is low and
the batteries need to be charged. Running the
engine will charge the batteries.

Light on indicates the batteries are fully discharged.
Run the engine to charge the batteries.

Note: Charging the batteries with the engine does
not fully charge the batteries. Use the AC charger
to fully charge the batteries at the end of machine
use.

Note: Machines equipped with Low Voltage
Interrupt Option will lose primary and secondary
boom lift functions when batteries are fully
discharged.

OPERATING INSTRUCTIONS

Engine Idle Select (rpm)

Select engine idle (rpm) using the symbols on the
control panel. Engine idle speed does not affect
machine function speed.

·

Rabbit and foot switch symbol:

foot switch activated high idle

·

Turtle symbol: low idle and slow battery

charging

·

Rabbit symbol: high idle and quickest battery

charging

At high idle, the engine supplies enough power for
charging and for machine functions. At low idle,
machine functions will use battery power.

Auxiliary Controls

Use auxiliary power if the primary power source
fails.

1 Turn the key switch to ground or platform

control.

2 Pull out the red Emergency Stop button to the

on position.

3 Press down the foot switch when operating the

auxiliary controls from the platform.

4 Simultaneously hold the auxiliary power switch

on and activate the desired function.

The drive function will not operate with auxiliary
power.

Advertising
This manual is related to the following products: