GE 29861 - Manual (Page 10)

10
Reviewing the Greeting
To review the greeting, press and release GREETING A or B.
Erasing the Greeting
There are two ways to erase your greeting.
1. To erase your greeting while listening to it, press and hold ERASE until the unit
announces, “ Greeting Erased”. Then record your new greeting.
2. To re-record your greeting from any point, press and hold GREETING A or B. After
the tone, say your greeting. Release GREETING A or B when you finish.
Returning to the Default Greeting
To return to the answerer’s default greeting after you’ve recorded one, press and hold
the GREETING A or GREETING B button until a beep sound is heard and then release
the button.
Alternatively, you can also press and hold the ERASE button when the greeting is
playing, release the ERASE button when the unit announces “Greeting Erased”.
Reviewing the Settings
This function allows you to review the current time/day, number of rings before the unit
answers a call, incoming message length, and the security code. Press and release the
SET button to review the current settings. The unit announces the current setting.
NOTE: To exit review, press and release STOP.
Changing the Settings
Press and hold the SET button to enter the change mode. The unit announces the
current time and day. To change, press NEXT or PREVIOUS. To set and go on to the
next item, press SET.
NOTE: To scroll from one setting to the next,
press and release SET. To exit the change list,
press STOP.
Default Settings
Time 12 a.m. Sunday
Rings to Answer 4
Message Length 2 minutes
Security Code 0123