GE 29861 - Manual (Page 13)

1
3. Press and release NEXT or PREVIOUS to choose the third digit. Only the third digit will
change.
4. Once you have the desired third digit, press SET to save it and move on to the fourth digit.
5. Press and release NEXT or PREVIOUS to choose the fourth digit. Only the fourth digit will
change.
6. Once you have the desired fourth digit, press SET to save it. The answerer repeats
all the settings.
NOTE: To exit any menu, press and release STOP. Also, setup will cancel if
no buttons have been pushed within 30 seconds.
IMPORTANT: The setup settings will not be erased even after a power
outage.
Adjusting the Volume
Use the VOLUME + and - buttons to increase the volume up and down. The unit
beeps when it is not announcing a setting or playing a message. It also beeps 3 times
when the maximum or minimum volume is reached.
Answerer Operation
Greeting Indicators
The GREETING indicators let you know what greeting will be used to answer a call.
GREETING A indicator is on — Greeting A will be used.
GREETING B indicator is on — Greeting B will be used.
Answer On/Off Indicator
The ANSWER ON/OFF indicator lets you know whether your answerer is on or off.
When the answerer is off, it answers calls after 10 rings but doesn’t play the greeting.
The answerer doesn’t take messages when it is off.
Indicator is on — Answerer is on and will answer calls according to the Rings to
Answer setting.