GE 29861 - Manual (Page 11)

11
Setting the Time
For each message received, a time/day stamp is added at the end of the message.
To Set the Hour
1. Press and release NEXT or PREVIOUS until the unit
announces and displays the correct hour.
2. Once the hour is set, press SET to enter the minutes
menu.
To Set the Minutes
1. Press and release NEXT or PREVIOUS until the unit
announces and displays the correct minutes.
2. Once the minutes are set, press SET to enter the day
menu.
To Set the Day
1. Press and release NEXT or PREVIOUS until the unit announces and displays the
correct day.
2. Once the day is set, press SET. The unit announces the time/day, then enters the
rings to answer menu.
NOTE: The days of the week show in the display as numbers. For example,
“Sunday” shows as 0.
Setting the Rings to Answer
This feature is used to set the unit to answer a call after a specific number of rings.
The unit announces the rings to answer. To change, press NEXT or PREVIOUS. To set
and go on to the next item, press SET.
1. Press and release NEXT or PREVIOUS until the unit announces and displays the
correct number of rings for the answerer to pick up.
2. Once the rings to answer is set, press SET. The unit announces the rings to answer,
then enters the incoming message length menu.
Range of Settings
Time
Hour
12 a.m. - 11 p.m.
Minute 0 - 59
Day Sunday - Saturday
Rings 2, 3, 4, 5, 6, 7, 8,
to Answer toll saver
Message
1, 2, 3, 4 minutes
Length
Security
0, 0 - 9, 0 - 9, 0 - 9
Code