GE 29861 - Manual (Page 16)

1
Message Scan
Message Scan allows you to listen to the first 5 seconds of each message within a
mailbox.
1. Press and release SCAN. The unit shows Sc and asks you to select a mailbox.
2. Press the desired mailbox button. The unit plays back the first 5 seconds of each
message in the mailbox. When finished, it automatically exits Scan mode.
While Scanning Messages
• To stop playback, press and release STOP.
• To hear the complete message, press and release the mailbox button where the
message is located before the unit goes on to the next message.
• To restart the message, press and hold PREVIOUS.
• To skip to the next message, press and release NEXT.
• To erase the message, press and hold ERASE until the unit announces it has been
erased.
• To move the message to another mailbox, press and release the desired mailbox
where you want to move the message.
NOTE: New messages must be heard completely, including the time/day
stamp, before they can be erased. The unit will announce you have no
messages to erase, if not.