Grizzly VS MILLING MACHINE G0669X - Manual (Page 38)

-36-
g0669X precision 10" x 54" Vs Milling Machine
G9299—10" yuasa-type Rotary table
this high precision rotary table features extra
deep coolant channels, dual positive action locks,
very low profiles, 10 second vernier scales, gear
drives with oil immersion and satin chrome dials.
see the current grizzly catalog for full specifica-
tions. Features: 4.330" overall height (horizontal),
6.750" height to center hole (vertical), #3 Morse
taper, 0.465" t-slot width, and 117 lb approximate
shipping weight.
figure 49. g9299 10" yuasa-type rotary table.
figure 50. recommended products for protect-
ing unpainted cast iron/steel part on machinery.
G5562—SLIPIt ® 1 Qt. Gel
G5563—SLIPIt ® 12 oz Spray
G2871—boeshield ® t-9 12 oz Spray
G2870—boeshield ® t-9 4 oz Spray
H3788—G96 ® Gun treatment 12 oz Spray
H3789—G96 ® Gun treatment 4.5 oz Spray
t20501—face Shield, 4" Crown, Clear
t20502—face Shield, 7" Crown, Clear
t20448—Economy Clear Safety Glasses
t20452—"Kirova" Anti-Reflective Glasses
t20456—"Dakura" Clear Safety Glasses
H0736—Shop fox
® Safety Glasses
these glasses meet ansi z87.1-2003 specifica-
tions. Buy extras for visitors or employees. you
can't be too careful with shop safety!
figure 51. our most popular eye protection.
t20448
H0736
t20452
t20501
t20456
t10063—Milling Vise 12 5 ⁄
16
" x 6 9 ⁄
16
"
t10064—Milling Vise 17 1 ⁄
8
" x 8 3 ⁄
4
"
• Ultra precise in flatness, parallelism and ver-
ticality.
• anti-lift mechanism ensures the workpiece
does not lift when jaws are tightened.
• ductile iron body.
• Flame hardened vise bed and jaws.
• sealed bearing system.
• 8200 lbs. of clamping pressure.
figure 48. t10064 Milling vise (handle included,
but not shown.