Grizzly T10165 - Manual (Page 4)

Model t10165 high-precision Mini rotary tool -2 -
7. only allow trained and properly super-
vised personnel to operate machin-
ery. Make sure operation instructions
are safe and clearly understood.
8. Keep children and visitors
aWay. Keep all children and visitors
a safe distance from the work area.
9. maKe WorKshop child proof.
Use padlocks, master switches, and
remove switch keys.
10. never leave When machine is
running. turn power off and allow
all moving parts to come to a com-
plete stop before leaving machine
unattended.
11. do not use in dangerous
environments. do Not use
machinery in damp, wet locations,
or where any flammable or noxious
fumes may exist.
12. Keep WorK area clean and
Well lit. Clutter and dark shadows
may cause accidents.
13. use a grounded eXtension
cord rated for the machine
amperage. Undersized cords over-
heat and lose power. replace exten-
sion cords if they become damaged.
do Not use extension cords for
220V machinery.
14. alWays disconnect from
poWer source before
servicing machinery. Make
sure switch is in oFF position before
reconnecting.
15. maintain machinery With
care. Keep blades sharp and clean
for best and safest performance.
Follow instructions for lubricating and
changing accessories.
16. maKe sure guards are in
place and WorK correctly
before using machinery.
17. remove adJusting Keys and
Wrenches. Make a habit of check-
ing for keys and adjusting wrenches
before turning machinery oN.
18. checK for damaged parts
before using machinery.
Check for binding and alignment of
parts, broken parts, part mounting,
loose bolts, and any other conditions
that may affect machine operation.
repair or replace damaged parts.
19. do not force machinery. Work
at the speed for which the machine or
accessory was designed.
20. secure WorKpiece. Use clamps
or a vise to hold the workpiece when
practical. a secured workpiece pro-
tects your hands and frees both
hands to operate the machine.
21. do not overreach. Keep proper
footing and balance at all times.
22. many machines Will eJect
the WorKpiece toWard the
operator. Know and avoid con-
ditions that cause the workpiece to
"kickback."
23. Be aware that certain woods may
cause an allergic reaction in peo-
ple and animals, especially when
exposed to fine dust. Make sure you
know what type of wood dust you will
be exposed to and always wear an
approved respirator.
safety instructions for machinery