Grizzly T10165 - Manual (Page 6)

Model t10165 high-precision Mini rotary tool -4 -
introduction
We are proud to offer the grizzly Model
t10165 high-precision Mini rotary tool.
this model is part of a growing grizzly fami-
ly of fine power tools. When used according
to the guidelines set forth in this manual,
you can expect years of trouble-free, enjoy-
able operation and proof of grizzly’s com-
mitment to customer satisfaction.
it is our pleasure to provide this manual
with the Model t10165. it was written to
encourage safety considerations and guide
you through general operating procedures
and maintenance.
the specifications, details, and photo-
graphs in this manual represent the Model
t10165 as supplied when the manual was
prepared. however, owing to grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obligation
on the part of grizzly.
foreword
required power ..................................110V
power output (at no load) ...................20W
Number of speeds ......................... Variable
speed range ............... 4,000–14,000 rpM
Max. Continuous operating time ......8 min.
Max. tool Bit diameter ...................... 7 mm
machine data
if you have any comments regarding this
manual, please contact us:
grizzly industrial, inc.
C/o technical documentation Manager
p.o. Box 2069
Bellingham, Wa 98227-2069
Email: [email protected]
Most importantly, we stand behind our
tools. if you have any service questions or
parts requests, please call or write us at
the location listed below.
grizzly industrial, inc.
1203 lycoming Mall Circle
Muncy, pa 17756
phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web site: http://www.grizzly.com
contact info
read the manual before operation.
become familiar with this nailer, its
safety instructions, and its operation
before beginning any work. serious
personal injury may result if safety or
operational information is not under-
stood or followed.