Grizzly T10165 - Manual (Page 5)

Model t10165 high-precision Mini rotary tool -3 -
additional safety instructions for
mini rotary tool
4. electrocution hazards. do
Not operate this tool in wet or damp
conditions. remove all liquids from
the work area before beginning oper-
ation. Make sure your hands are
clean and dry.
5. WorKpiece contact. Jamming
the spinning tool against the workpiece
could cause the workpiece or tool to
shatter and send debris in all direc-
tions. Firmly grasp the rotary tool and
ease it into the workpiece.
6. tool capacities. to avoid dam-
age to the tool or workpiece that
may cause operator injury, alWays
operate this tool within the capacities
stated on
page 4.
7. accidental startup. to avoid
unexpected startup that may cause
injuries, alWays make sure the rota-
ry speed dial is turned
OFF before
connecting the tool to power.
no list of safety guidelines can be
complete. every shop environment is
different. always consider safety first,
as it applies to your individual work-
ing conditions. use this and other
machinery with caution and respect.
failure to do so could result in seri-
ous personal injury, damage to equip-
ment or poor work results.
1. clamp the WorKpiece. if the
spinning tool slips from the workpiece
while you are holding it, you could
suffer piercing or abrasion injuries.
do Not hold the workpiece with one
hand and operate the tool with the
other. secure the workpiece in a vise
or work-holding device before starting
the rotary tool.
2. eXplosion hazards. sparks
from the grinding operation can eas-
ily ignite flammable gasses, fluids, or
materials. alWays make sure that
these substances are completely
removed from the work area before
beginning operation.
3. entanglement hazards.
loose clothing or jewelry can become
entangled with the spinning tool, pull-
ing hands and fingers into the bit.
to avoid this risk, remove jewelry,
secure loose clothing, button long
sleeves, and tie back long hair.