Focusing and zooming the image, Selecting the input signal setting, 21 focusing and zooming the image – Garmin POWERLITE CINEMA 200+ User Manual
Page 21
21
Focusing and Zooming the Image
To adjust the sharpness or size of the image:
Note: Before starting, you may want to display a test pattern to facilitate adjustment. Press the
Pattern button on the remote control, then select Cross-hatching.
1. Press the
Focus
or
Zoom
button on the projector or
remote control. You see this screen:
2. Use the arrow buttons to adjust the image
sharpness or size.
Note: If you use the remote control, you can stand close
to the screen while focusing the image. This lets you
adjust the picture more precisely.
3. Press
E
SC
when done.
Selecting the Input Signal Setting
If you’re using the projector’s Input A port, select the correct setting for the type of video
equipment you’ve connected to it:
1. Press the
Menu
button on the remote control.
2. Use the menu navigation buttons to open the
Setting
menu, then open the
Input Signal
menu and select
Input A
.
3. Choose from these options:
■ YCbCr
for a video player that outputs an NTSC signal.
■ YPbPr
for a video player that outputs an HDTV signal.
■ RGB-Video
for a video player that outputs an RGB video signal.
Note: Check the label next to the port on your video equipment, if you’re unsure of which
setting to use.
PowerLite Cinema 200+.book Page 21 Thursday, August 18, 2005 2:37 PM