Garmin POWERLITE CINEMA 200+ - Manual (Page 50)

50
Changing the Remote Control’s Batteries
The remote control uses two AA batteries. If you suspect they are weak, take the remote
control to a darkened room and press the
illumination button. If the buttons on the
remote control do not glow red, replace the batteries as described below.
Warning: Keep batteries away from children. If a battery is swallowed, contact your doctor
immediately.
1. Release the tab and lift open the cover.
2. Remove the old batteries and insert new AA batteries as shown.
3. Replace the cover.
PowerLite Cinema 200+.book Page 50 Thursday, August 18, 2005 2:37 PM