GE Monogram ZMC1090BV - Manual (Page 18)

Installation
Built-In Oven s
18
• Slide oven into cabinet opening.
• Drill 3/32" pilot holes through mounting holes in
oven front frame. (2 screw holes for single ovens,
4 screw holes for double ovens.)
• Secure oven in place with screws furnished. (Use
drywall screws if cabinet is particulate board).
Secure
oven
to cabinet
CAUTION WARNING
Securely fasten oven to cabinet using the
screws provided.
Failure to do so could
cause the oven to move or tip during use
and result in personal injury.
• Remove toweling. The hinges should still be in stop
position.
• Slide the door down onto the hinges as far as it will
go. Close the door.
With oven installed:
• Connect oven power cable to junction box, using
flexible power cable connector.
– Be sure connections are secure.
Connect
electrical
Replace the
oven door