GE Monogram ZMC1090BV - Manual (Page 6)

Cabinetry
Built-In Oven s
• 2" x 4" lumber for runners
• Saw
• Level
• Phillips screwdriver and wood screws or other hardware for
installing runners or shelf to support oven.
Ovens are designed for installation in a cabinet 27" min. wide.
• Cut 2" x 4" runners of appropriate length or solid shelf to
support oven.
• Attach runners or solid shelf in opening as shown.
• Runners must be level and rigidly mounted.
6
Tools and
materials
required
Framed cabinet
double oven
Use the information in this dimension drawing for
typical framed cabinets. The front face of the oven
will be flush with cabinetry doors or drawers.
Order a double oven cabinet.
Rough opening for double oven must be:
• Depth—23-5/8" min. from inside back to front of
cabinet frame.
• Width—25" min.
• Height—49-11/16" min. 50-1/8" max.
• Installing 13-1/4" from floor will place base of upper
oven at countertop level.
– May be more than 13-1/4" from floor, depending
upon user preference.
• All Monogram ovens require 7/8" overlap to
both sides and bottom. Allow 1/4" min. for top
overlap.
• Oven overlaps will conceal all raw edges.
DIMENSIONS
A Cabinet Width 27" Min.
B Cutout Width 25 " Min.
C Cutout Height 49-11/16" Min./50-1/8" Max.
D Cutout Depth 23-5/8" Min.
E Cutout Location 13-1/4" Min.
H Overall Height 50-3/4"
W Overall Width 26-13/16"
Front Framed
Partial Overlay Door
Front Framed Full
Overlay Door