GE PFMN445 - Manual (Page 11)

11
Built-In Rack Dry System
A handy drying rack may be used for drying items such as tennis shoes. Place items
flat on the drying rack and block such items as wool sweaters and delicate fabrics.
Dry with low heat.
To install the Built-In Rack Dry System
1. Make sure the drum of the dryer is oriented so the rack drying system is on the left
side of the dryer.
2. Pull the drying rack screen out from the left side and engage the handle “posts” in
the opposite baffle slots.
3. Place the garment on the rack and close the door.
4. Press the DRyER RACK button.
5. Select desired time.
6. Press the START/PAUSE button.
NOTE:
n
Do not use this drying rack when there are other clothes in the dryer.
n Make sure to detach the drying rack at the end of the cycle and fully retract the
screen back into the baffle.
About dryer features (cont.).
GEAppliances.com
To Use the Built-In Hook
for Hanging Garments
1. Make sure the drum of the dryer is
oriented so the hook is on the top
center of the dryer.
2. Using your finger, pull the hook out
of the baffle.
3. Hang the garment on a hanger, hang
the hanger on the hook and close the
door.
4. Press the DRyER RACK button.
5. Select the desired time.
6. Press the START/PAUSE button.
Reverse Tumble ™
All Profile front-load matching dryers are equipped with the Reverse Tumble ™ feature,
as part of the Duo Dry Plus system ™ . By reversing the direction
of drum rotation during the drying cycle, your dryer will tangle the clothes load less,
dry more evenly and improve drying times. Typical loads such
as bed and bath mixed loads, where sheets, towels and pillow cases are laundered
together, benefit from this capability. When the dryer reverses direction, there will be
a slight pause and sound change. This is normal.
All dryer cycles utilize this feature, except when the rack dry option is selected,
in which case the drum does not tumble.
Engage the handle posts