GE PFMN445 - Manual (Page 8)

About the dryer control panel.
Specialty Cycles
1. Turn the CyCLE knob to SPECIALTy CyCLES. A list of cycle options will appear in the display.
2. Using the cursor buttons, select a CATEGORy.
3. Using the cursor buttons, select a CyCLE.
Press the BACK button to take you back to the CATEGORIES.
4. Press ENTER to select.
5. Press the START/PAUSE button.
SPECIALTy CyCLES include:
Garment
n
coats
n Hosiery/Bras (use mesh bag)
n Jeans
n Khakis
Bed and Bath
n
Blankets (Cotton)
n Comforters
n Sheets
n Towels
Specialty Cycles
n
Air Fluff
n Dryel
n Fleece
n Fragile Cottons
n Performance Fabrics
n Pet Bedding
n Play Clothes
n Rack Dry
n Sleeping Bag
n Throw Rugs
9
Washer Communicated Cycles
To turn on communication, press the
SETTINGS button on the washer control
panel. When “DRYER LINK” appears in the
display, press ENTER. Using the arrow keys,
select ON; then press ENTER.
When the washer cycle is completed, the
washer will communicate with the dryer
when any button on the control panel is
touched or the door is opened.
The washer will display, “TRANSFERRING
CYCLE INFORMATION TO THE DRYER” and
the dryer will display, “RECEIVING CYCLE
INFORMATION TO THE DRYER”.
The dryer will only communicate with the
washer if the dryer is not running a cycle.
If the washer starts a new cycle before the
dryer has a chance to communicate with
it, the information will be lost.
8