Operating the hd pattern signal generator, System reset – Gefen GTB-HD-SIGGEN User Manual
Page 22
16
OPERATING THE HD PATTERN SIGNAL GENERATOR
Pattern Buttons
To change the pattern, use the ▲ and ▼ Pattern buttons. The ▲ button will
move forward through the patterns (see the pages 14 - 35 for a list of available
patterns). Use the ▼ button to move backward through the patterns.
Resetting the HD Pattern Signal Generator
To reset the HD Pattern Signal Generator to factory default settings,
simultaneously hold down the Color Space Selection button and the Bit Depth
Selection button. During the reset sequence, the LCD display will show the
message:
System Reset
Cycles forward
through the timings
Cycles backward
through the timings
Press to reset
the Generator
System Reset
message
TIP:
Press and hold the ▲ or ▼ buttons to rapidly cycle through
either the timings or patterns.