Gefen GTB-HD-SIGGEN - Manual (Page 30)

24
PATTERN SUMMARY
Circles
Pattern 37 (P37)
Produces a pattern with large circles on the screen. This pattern is primarily used for
checking the overall geometry and linearity of the display.
P37 CIRCLES
EDID
Pattern 38 (P38)
Displays the EDID pattern screen. This pattern is used to analyze the EDID data of
the connected sink (display, A/V receiver, etc).
P38 EDID Analysis
The EDID pattern supports up to two (2) blocks (Block0 and Block1).


Jump directly to the
EDID pattern (P38)
from any pattern
TIP:
The EDID pattern (P38) can also be directly accessed by pressing
the [EDID] button on the top panel.