Gefen GTB-HD-SIGGEN - Manual (Page 79)

73
Erasing the EDID from a Sink
The ERASE function will erase the EDID of a sink device.
1. Make sure that the sink device is connected to the HD Pattern Signal
Generator.
2. Click the ERASE button.
3. The HD Pattern Signal Generator software will prompt you before erasing
the sink’s EDID. Click the Yes button to continue with the erasure. Click No
to return to the EDID Read / Write screen.
HD PATTERN SIGNAL GENERATOR SOFTWARE
Click to erase
the sink’s EDID
WARNING: Be sure to save a copy of the sink’s EDID before
performing the ERASE function. This will allow the sink’s EDID to
be restored if necessary. Also note that not all device EDID data
structures can be erased. If the sink’s EDID cannot be erased, then
the ERASE procedure will fail.