Gefen GTB-HD-SIGGEN - Manual (Page 82)

76
HD PATTERN SIGNAL GENERATOR SOFTWARE
An existing timing and pattern set can be replaced by clicking (highlighting)
the set, selecting the new timing and new pattern from the drop-down list
boxes, then pressing the Add / Replace button.
Use the Delete button to remove a timing / pattern set from the Autorun
Confi guration llist.
6. Click the SET button to write the changes to the HD Pattern Signal
Generator.
Panel Control
The Panel Control screen allows remote control of the front panel buttons on the
HD Pattern Signal Generator. The current settings will be indicated by green
buttons.
The Download button is used to retrieve the current settings from the HD Pattern
Signal Generator.
Downloads current
Autorun list