Grizzly G0671 - Manual (Page 23)

Model G0671/G0672/G0673 (Mfg. Since 1/13
-21-
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
floor Load
refer to the Machine Data Sheet for the weight
and footprint specifications of your machine.
some residential floors may require additional
reinforcement to support both the machine and
operator.
Placement Location
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your new machine. see
figure 8 for the minimum
working clearances.
Site Considerations
80 3 ⁄
8
"
73 7 ⁄
8
"
80 3 ⁄
8
"
31 3 ⁄
8
"
G0671/G0672
G0673
figure 8. Model g0671-3 illustrated top view
and suggested clearances.
assembly
To assemble the dust collector:
1. With assistance, place the impeller housing
on the floor so that the motor is pointing up.
2. insert the legs into the leg mounting brackets
and secure them with the eight 5 ⁄
16
"-18 x 2 1 ⁄
2
"
hex bolts and 5 ⁄
16
"-18 hex nuts, as shown in
figure 9. do not yet fully tighten the nuts.
x8
figure 9. Attaching legs to impeller housing
(Model G0673 shown).
leg Mounting Bracket
leg
3. attach the four leg braces to the legs with
the (16) 5 ⁄
16
"-18 x 1 ⁄
2
" hex bolts, as shown in
figure 10. Fully tighten the bolts and the
hardware from
Step 2.
x16
figure 10. attaching leg braces.
leg Brace
leg