Grizzly G0671 - Manual (Page 36)

-34-
Model G0671/G0672/G0673 (Mfg. Since 1/13
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
SECTiON 5: OPERaTiONS
NOTICE
if you have never used this type of machine
or equipment before, WE STRONGLy REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly industrial will
not be held liable for accidents caused by
lack of training.
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
basic Controls
this section covers the basic controls used during
routine operations:
ON button: starts the motor.
Off button: stops the motor.
figure 38. on/oFF button locations.
General
operating your Model g0671/g0672/g0673 is
simple and straightforward. Blast gates located
at each of the woodworking machines control the
airflow from the woodworking machine to the dust
collector. if a machine is not being used, keep
the blast gate closed to maintain higher levels of
efficiency throughout the system.
DO NOT use the dust collector for any
other purpose besides collecting dust from
connected woodworking machines. a dust
collector should NEVER be used as a shop
vacuum. for safest use, wear a respirator
and use an air cleaner in addition to the
dust collector.
on
oFF