GE 24929 - Manual (Page 13)

Troubleshooting
Remote does not operate your product.
•.. Press.the.mode.button.of.the.product.you.want.to.
control.
•.. Program.the.remote.with.a.new.code.
•.. Install.new.batteries..(You.might.have.to.reprogram.
your.remote.after.installing.new.batteries.)
•.. Remote.may.not.be.compatible.with.your.product.
Remote does not operate some features of your
product.
•.. Program.remote.with.a.new.code.
•.. Remote.may.not.be.able.to.operate.all.features.of.your.
product.or.button.names.might.be.different.than.your.
product.
Red Indicator blinks after you program a product
code.
•.. Remote.did.not.accept.the.code.
•.. Try.to.program.the.code.again.or.try.a.different.code.
Lost Your Codes?
Enclosed.with.this.remote.is.a.sticker.on.which.you.
should.write.the.codes.for.each.device.you.programmed..
Apply.the.sticker.to.the.back.of.the.remote.or.
somewhere.convenient.for.future.reference.
Also.on.the.sticker.is.our.website.address.which,.should.
you.lose.your.codes.or.programming.instructions,.you.
can find available on our website:
www.jascoproducts.com