GE 24929 - Manual (Page 7)


Direct Code Entry
1....Press.and.hold.the.SETUP.button.until.the.red.
indicator.stays.on,.then.release.the SETUP.button.
2....Press.and.release.the.desired.mode.button.(TV,
DVD,.etc.)..The.red.indicator.blinks,.then.stays.lit...
3.. Enter.the.4.digit.code.from.the.code.tables.(on.
separate.sheet)..Note:.after.a.valid.code.entry,.the.
red.indicator.turns.off...For.an.invalid.code,.the.red.
indicator flashes.
4.. With.your.device.on,.press CHANNEL UP..If.
the.device.responds,.no.further.programming.is.
required..Note:.If.some.buttons.do.not.operate.your.
equipment,.try.one.of.the.other.codes.for.your.brand.
Write.your.codes.down.here.for.easy.reference.later.
Device. Device.stored. Code
TV.. TV
DVD.
CBL/SAT
DVR/AUX