GE 24929 - Manual (Page 6)


Battery Installation
1.. On.the.back.of.the.remote,.push.down.on.the.tab.and.
lift.the.cover.off.
2.. Match.the.batteries.to.the.+.and.-.marks.inside.the.
battery.case,.then.insert.2.AAA.alkaline.batteries.
3.. Press.the.battery.cover.back.into.place.
Battery Saver
Your.remote.automatically.turns.off.if.the.buttons.are.
depressed.more.than.30.seconds..This.will.save.your.
batteries.should.your.remote.get.stuck.in.a.place.where.
the.buttons.remain.depressed.(e.g.,.between.the.sofa.
cushions).
Code Saver
You.will.have.up.to.10.minutes.to.change.the.batteries.
in.your.remote.without.losing.codes.you.have.
programmed..However,.do.not.press.any.buttons.until.
batteries.are.installed.in.the.remote..If.buttons.are.
pressed.without.batteries.in.the.remote,.all.codes.will.be.
lost..
Power-On Default
The.remote.powers.on.in.TV.mode.
Code Setup
The.SETUP.button.is.used.to.setup.the.remote..You.can.
either.setup.the.remote.using.the.code.for.your.brand.of.
product,.from.the.code.tables.(on.separate.sheet),.or.you.
can search through the library of codes until you find a
code.that.works.for.your.product.
Please.refer.to.“Programming.with.Code.Search”.on.
page.8.for.more.information.on.using.the.code.search.
feature.to.learn.how.to.search.through.the.library.of.
codes.for.your.products.
NOTE:.You.can.store.any.kind.of.code.under.any.mode.
(except.TV)..I.E..you.can.store.a.VCR.code.under.the.
CBL button,.or.a.SAT.code.under.the.DVD button,.etc..
However,.you.can.only.store.TV.codes.under.the.TV
button.
Setup