GE 24929 - Manual (Page 8)


Code Search
If.your.product.does.not.respond.after.you.have.tried.all.
the.codes.for.your.brand,.or.if.your.brand.is.not.listed,.
try.searching.for.your.code.by.following.these.steps.
1.. Manually.turn.on.the.device.(TV,.DVD,.etc.).to.be.
controlled.
2.. Press.and.hold.the.SETUP.button.until.the.red.
indicator.stays.on,.then.release.the.SETUP button.
3... Press.and.quickly.release.the.desired.mode.button.
(TV,.DVD,.etc.)..The.red.indicator.blinks.off.once.
4.. Press.the.CHANNEL UP.button.repeatedly.(up.to.
300.times).until.the.device.to.be.controlled.changes.
channel..The.red.indicator.blinks.off.with.each.
button.press...If.you.accidentally.overshoot.the.code.
required,.press.the.CHANNEL DOWN button.
to.backtrack.through.the.library.until.the.device.
changes.channel..Pressing.CHANNEL UP.changes.
direction.to.forward.again..
5.. Press.and.release.ENTER to.install.the.code..
Most.users.will.store.DVD.codes.under.the.DVD but-
ton,.Cable.codes.under.CABLE,.etc..If.(for.example).
you.want.to.store.a.DVD.code.under.CABLE, first
follow.the.procedure.for.Direct.Code.Entry.(previous.
page).and.press.CABLE in.step.2.of.Direct.Code.Entry,.
then.enter.ANY.DVD.code.in.step.3.of.Direct.Code.
Entry..Then.follow.the.steps.for.Code.Search.on.the.pre-
vious.page..Note:..If.the.device.does.not.have.a CHAN-
NEL UP.button,.use.PLAY (DVD.only).or.ON-OFF
instead..Code.Search.starts.from.the.currently.stored.4.
digit.number.under.that.mode.