Remember: safety first – Grizzly G1016 User Manual
Page 6
II. Safety Rules for all Tools
Hunter’s Meat Cutting Bandsaw
- 3 -
18. NEVER STAND OR LEAN ON
TOOL. Serious injury could occur if the
tool is tipped or if the cutting edge is acci-
dentally contacted.
19. CHECK DAMAGED PARTS. Before
further use of the tool, any part or guard
that is damaged should be promptly
repaired or replaced. Do not operate the
machine until you are certain that it is in
perfect running condition. Failure to fol-
low this precaution could result in further
mechanical damage and operator injury.
20. DO NOT WORK IN HASTE or oper-
ate machine if you are mentally or physi-
cally fatigued.
21. NEVER LEAVE THE TOOL RUN-
NING UNATTENDED - TURN
POWER OFF. Do not leave the tool until
it comes to a full stop.
22. DO NOT OPERATE THE TOOL
UNDER THE INFLUENCE OF
DRUGS, ALCOHOL, OR MEDICA-
TION. Never operate machinery when
overly fatigued.
23. IF THERE IS SOMETHING YOU
DO NOT KNOW OR UNDERSTAND
ABOUT THIS MACHINE, DO NOT
OPERATE IT! Ask for help first.
Confusion is dangerous.
24. BAD HABITS ARE DANGEROUS.
Review all safety procedures often.
These safety rules, while expansive, may not
cover every situation. Please consider your
unique conditions when setting up and using
your saw.
More safety rules are reviewed in Section
IX.
Remember:
Safety First!
End of Section